StarTech.com 3m (10ft) LC/UPC to LC/UPC OM4 Multimode Fiber Optic Cable, 50/125µm LOMMF/VCSEL Zipcord Fiber, 100G, Low Insertion Loss - LSZH Fiber Jumper Cord

Product Overview

AI-generated summary

For £16.66 ex‑VAT for a 3m LC/UPC to LC/UPC OM4 LSZH fibre jumper, this is a pretty sensible “get the job done” lead. If you’re just patching between a transceiver and a nearby rack patch panel/patch lead, the low insertion loss angle matters because it helps you avoid fighting margin issues—especially at higher speeds like 100G where sloppy optics or cheap connectors can become a headache. The LC/UPC end is also the practical choice in most UK datacenter/enterprise builds, so you’re unlikely to run into weird compatibility problems.

That said, it’s not the best buy if you’re trying to build anything outside a typical patching scenario. It’s a short OM4 zipcord: great for rack-to-rack-ish distances, poor fit if you actually need longer runs or you expect frequent reconfiguration. Also, because it’s LC‑to‑LC, make sure your transceivers/patching are truly UPC on both sides—don’t assume “multimode is multimode” if you’re mixing kit. If you need a bunch of these and want consistency, it’s good value; if you only need one-off or you’re unsure about connector polish/type, I’d pause and verify before ordering so you don’t waste time on the wrong end.